Posts Tagged ‘fiber optic transmitter’

What componets you need in a fiber optic CCTV transmission system

June 21, 2010 Leave a comment

The sole purpose of the fibre optic link in a CCTV fibre optic transmission systems is to transfer electrical signals between two remotely separated points, A and B, with no degradation in the transmitted signal quality. In this way the fibre optic link becomes transparent to the user. An analogous situation is with a telephone call where you want to be able to talk to another person anywhere as though they were standing next to you.

The basic components of a CCTV fibre optic transmission system are as follows:

·  Electrical to Optical Converter (Transmitter) at the camera end of the link. This unit takes the analogue 1 v peak to peak signal from the surveillance camera and converts it into a light signal that varies in proportion to the camera output signal. The light signal is generated by an LED (light emitting diode) or laser transmitter which is designed to couple a maximum of the generated light into an optical fibre.

·  The optical transmission fiber and fiber optic cable. The optical fibre guides the light from the LED or laser transmitter with a minimum of loss to the monitor or matrix controller end of the link. The optical fibre itself is protected by a variety of sheathing materials to provide a cable construction appropriate to the specific application. The fibre cable is connected to the terminal equipment using de-mountable screw or bayonet fixing connectors.

·  Optical to Electrical Converter (Receiver) at the monitor end of the link. This unit takes the optical signal from the optical fibre and converts it into an analogue electrical signal that is compatible with the monitor input requirements. The light to electrical conversion is carried out by a semiconductor detector which is called a photodiode, or an avalanche photodiode. Subsequent electronic circuitry regenerates the output signal. Products from the better quality manufacturers compensate for optical fibre losses and transmitter output intensity variation with time and temperature by providing automatic gain control to give a standard 1 v peak to peak output format as generated at the camera output.

·  Control data and audio connections. Cameras in CCTV installations are either fixed, viewing a specific scene, or movable, so that different scenes can be viewed under the direction of the operator who would be sited in the remote control room. In the case of fixed cameras then the fibre optic link is required to transmit video only information from the camera to monitor, this requires only a single fibre link for each camera to monitor path. In the case of a movable camera then a return signal must be provided from the control room to the camera usually over a second optical fibre. It is usual for these return control links to provide remote control of the camera PTZ – pan, tilt and zoom functions plus
camera enclosure wash/wipe activation.

If camera control is used then the fibre optic link interface electronics must be compatible with the protocols used by the controller manufacturer. These functions are transmitted over the return fibre link using a standard digital transmission format such as RS232, RS485/422, 20 mA current loop and most recently Echelon Lonworks FTT10A. In addition some controller manufacturers require a return data channel from the camera to confirm camera movement. This return data is usually encoded by the camera optical transmitter electronics and sent over the same fibre as the video signal.

Help point and door entry installations require the transmission of two-way audio signals over the fibre link. Again optical transmitter and receiver units are available to provide this facility in addition to the video and control data links all over the same two fibres. It is also possible to provide all of these video, data and audio transmission functions over one fibre using different wavelength (colour) lights sources to transmit light in each direction. This technique is known as wavelength division multiplexing; it maximises the use of installed fibre cores but at the expense of more costly fiber optic transmitters and fiber optic receivers.

Use fiber optics to transmission CCTV camera video singal

June 21, 2010 Leave a comment
June 12, 2010, 4:57 am

The principle reasons for using optical fiber as the transmission media in CCTV applications are:

·  The maintenance of picture quality and control data integrity over extended distances:
This is the major reason for using fibre optics which have superior signal amplitude loss characteristics than copper cable. Typically co-axial cable attenuation at a signal frequency of 5 MHz can be 20 dB/km. In comparison fiber attenuation is between 0.3 and 3 dB/km meaning that fiber optic transmitter distances of 60 km+ can be achieved, depending on the precise details of the application. In addition this low fibre signal attenuation is achieved over a very wide signal frequency range so that optical fiber can be used for the transmission of multiple video signals over long distances.

·  Immunity to electromagnetic interference:
Optical fibre transmits signals as light pulses rather than electrical pulses. This light transmission is unaffected by the presence of electro-magnetic fields. As a consequence fiber optic transmission can be used in applications where links are routed near electrical conductors and electrical machines. This includes applications such as railways, tramways, power generation and vehicle manufacture with welding machinery. In addition the fibre cable usually has a metal free construction so that there are no ground loop problems between terminal equipment and the cable will not transmit lightning pulses. This elimination of ground loops makes fibre cable the media of choice for inter building links of whatever distance.

·  Security of Information and Operational Safety
Unlike copper cables fiber cables do not radiate any signals as a consequence fiber optical cables are virtually immune from “tapping” and so the signal content is difficult to access for unauthorised parties. As there are no emissions from optical fibre cable there is no risk that a fibre installation will act as a ignition source. This means that fibre can be used in explosive atmospheres such as chemical and petro-chemical sites providing a truly “Intrinsically Safe” transmission path. Note however, that this Intrinsic Safety, would not extend to the electro-optic termination modems which would need to be safety certified and protected the same as any other electrical equipment.

·  Efficient use of duct space.
Optical fibre itself is very small, each glass fibre being only 0.125mm diameter. Protective sheathing is then applied in stages, depending on the application area, to make up the fibre into a usable cable. Typically resulting cable would have a diameter of 3mm for a single fibre core patchlead or 8mm for a 8 fibre cable suitable for internal or external use. In contrast 75 Ohm CT100 coaxial copper cable has a diameter of 6.5 mm. It can therefore be seen that the small size of fibre cable gives significant savings over copper where installation space is in short supply or where duct space is limited. Along with the small fibre cable size comes a weight saving both of which give savings in storage and transportation costs prior to installation.

·  Multi-channel capability and “Future Proofing”.
While most CCTV fibers today will be used to transmit one video signal and perhaps a control data signal, the user may wish to upgrade the system to support more camera and control channels. Any glass optical fiber used today is able to transmit multiple optical channels either by using different optical carrier “colours” i.e. wavelength division multiplexing or by increasing the signal frequency using electrical multiplexing techniques. The transmission media is hence “future proofed” and the link will need only additional fiber optic converter equipment to expand the link capacity.


June 7, 2010 Leave a comment

For political conventions of news was live from Super Bowl VOSCOM’S VOS-1000 on the grounds of the fiber optic transmission systems, has contributed to CBS News Top Stories provide viewers at home. VOSCOM, a leading provider of fiber optic converter for audio and video routing solutions for the delivery of broadcasting and Pro A / V applications YOUR-winning CBS News in 1000 as part of their equipment for the transmission of video from multiple locations in the diffusion of various new programs.

“For the live broadcast of our regular news broadcasts in several places, the sand on the south beach, Sun Life asked Stadium during the Super Bowl, that the material must be very portable,” says Mel Olinsky, Director of the Office Operations, CBS News. “Working on-site, we also need to transport HD signals over long distances, which was impossible with copper. The VOS-1000 field optics fiber transmission provided that the all of our cable connectivity over a fiber strand multi without restrictions on duration. ”

CBS VOS-1000 widely used, several major events including political conventions and the last Super Bowl. During the week before Super Bowl VOSCOM Use VOS-1000 video transport for several new programs, including “The CBS Early Show,” CBS Weekend Evening News “and” Face the Nation “, all live in different places, including South Miami and Miami Beach Gardens Sun Life stage. For these shows, CBS News needed the ability to supervise both HD and SD video signals and wanted to and fro transportation from various locations in South Florida’s network OB truck, often parked near the place . A battery, bi-directional HD designed the fiber transmission system for field use and harsh environment applications, the VOS-1000 is the ideal portable solution for transmitting signals over distances ranging up three football fields away from turning over any local transport.

Frank Xu, Director General, VOSCOM, said: “The Place-ENG and production can be very hectic, especially in advance of important events.” He concluded: “The VOSCOM takes some of the stress of live shooting distance, as it is very easy, quite robust to any state in the field and transported extremely reliable. We are very pleased that our VOS-1000 plays a role, ensuring that emissions go up CBS News smoothly. “

CBS News continued to units VOS-1000 for remote broadcast. For more information on the VOS-1000, please visit

CCTV PTZ Cameras Video Transmission over Fiber Optics Application

May 27, 2010 Leave a comment

Single CCTV PTZ Camera Video Transmission over fiber optics, support 8-bit digitally encoded broadcast quality video, data and 10M/100M IP Ehternet over one multi-mode or single-mode optical fiber. The modules are directly compatible with NTSC, PAL, and SECAM camera systems and support RS-485, RS-232, and RS-422 data protocols. These Transmitter and Receiver are typically used in applications with PTZ cameras for security surveillance, CCTV, ITS, CIQ, etc.

Remote PTZ analog camera with fiber optical connection to be viewed on a video monitor.
EXAMPLE: Owner of building needs to view and control an PTZ Dome Camera from Monitor Center.

Standard PTZ equipped CCTV camera is connected to the VOSCOM Fiber Optic Video & Data Transmitter using standard coax cable. The transmitter digitally compresses the signal for transmission across the Fiber Optical Cable.
At the Monitor Center, the receiver can receive the signal and the user can view the video image and control the camera movement using a standard Keyboard.
more information please find in the website:

1) VOSCOM Fiber Optic Transmitter can transmit 1~64 channels video signals and data support RS485, RS232, RS422. you can choose our fiber optic products according to your needs.
2) If you just need to control the PTZ cameras, one return data is enough, in theory, one channel data can control 1~128 PTZ cameras, the detail connection information you can refer to your PTZ camera’s manual.

Baseband Video Fiber Optic Transmission

May 13, 2010 Leave a comment

Baseband video consists of one video picture being sent point-to-point, such as the video output of a VCR to the video input of a monitor. Figure 1 illustrates simple point-to-point transmission. There exist two levels of service for baseband video: broadcast studio and consumer. These types describe, primarily, the quality of the signal. Broadcast studio quality requires a much higher signal fidelity, while consumer quality baseband requires is less demanding. In addition to the difference in signal fidelity, there is also a difference in the connectors typically used for the transmission of these signals. The broadcast baseband applications typically use a BNC connector and the consumer baseband applications typically uses an RCA connector.

Figure 1 – Point-to-Point Transmission

Figure 2 – BNC and RCA Connectors

Baseband Video Signals
The most basic form of a television signal is a baseband video signal, also referred to as a composite video signal. In an AM baseband system, the input signal directly modulates the strength of the transmitter output, in this case light. The baseband signal contains information relative to creating the television picture only. The following information is carried on a baseband signal:

• Scanning: drawing the television picture
• Luminance: the brightness of the picture
• Chrominance: the color of the picture

The creation of the baseband signal produces a range of frequency components. The highest frequency in a baseband signal is also its bandwidth. The lowest frequency ranges close to zero Hz or DC. The video output of a television camera or video tape recorder has its highest frequency, therefore, its bandwidth, at either 4.2 or 6 MHz, depending on the type of TV format used. Looking at an actual baseband signal, illustrated in Figure 3, we can see that the camera and the video display are scanned horizontally and vertically. The horizontal lines on the screen are scanned alternately, with the odd numbered lines first and the even numbered lines second, or vice versa. (Figure 3B depicts the initial scan of the odd numbered lines.) This method is known as an interlacing system. The second method is to scan the lines sequentially; this is known as progressive Scanning. The camera and receiver must be synchronized when scanning and reproducing an image. The horizontal and vertical sync pulses regulate the synchronization of the camera and receiver, illustrated in both 3B and 3C, and starts a horizontal trace. As seen in Figure 3A, during the horizontal blanking interval, the beam returns to the left side of the screen and waits for the horizontal sync pulse before tracing another line. The dotted line illustrated the horizontal retrace. When the beam reaches the bottom of the screen, it must return to the top to begin the next field. This is called the vertical retrace, which is signaled by the vertical sync pulse illustrated in Figure 3C. The vertical retrace takes much longer than the horizontal retrace, therefore, a vertical blanking interval ensues to synchronize the two signals. During both the horizontal or vertical blanking intervals no information appears on the screen.

Figure 3 – Baseband Composite Video Signals

Baseband Video Applications
Figure 4 illustrates a multimedia baseband fiber optic transmission systems.

Figure 4 – Multimedia baseband transmission