Archive for April, 2010

How Fibre Optic Surveillance Systems Work

April 11, 2010 1 comment

Protection With Fiber Optic Surveillance Systems

Security has become a word that is taken very seriously in the twenty-first century. Optical surveillance systems are security set-ups that utilize cameras which are able to monitor surrounding areas in various lighted (or non lighted) environments. The cameras are able to adjust to day or night conditions and allow clear imaging of an area. Many different locations are using optical surveillance systems to achieve security goals.

These include:

• Transportation such as airports, and public transportation terminals

• Manufacturing facilities, particularly large ones that have a high risk threat such as petroleum processing and military sites.

• Military and Armed Services, including defense facilities that rely heavily upon optical surveillance, even in the battlefield.

Optical surveillance systems are able to transmit images by different means such as fiber optic technology. To understand how fibre optic transmission systems work, you will need to understand the basics of fiber optics.

How Fibre Optic Surveillance Systems Work

Digital images are transmitted through a camera via a fiber optic cable. Fiber optic cable consists of strands of pure glass that are thinner than human hair. The strands carry digital information (such as images) over distance and deliver the information to a receiver. The strands are arranged in bundles that have an outer jacket (covering).

The light (image) is transferred along the fiber optic cable by bouncing along the mirror lined walls of the cable. The purity of the glass used in the fiber optic strands affects the clarity of the image transmitted to the receiver. This is an important factor to keep in mind if you are looking to purchase any fiber optic products.

Fibre optic surveillance systems allow wireless surveillance camera systems to function and transmit images. The system is comprised of these components:

1. A fiber optic transmitter is used to feed data into. The transmitter transforms the information into coded light.

2. The optical fiber conducts the light signals over a distance.

3. An optical booster may be used to amplify the light if it is traveling a long distance.

4. An optical receiver decodes the light signal back into the original data format.

This method is how information is transferred from wireless surveillance camera systems. The camera takes the image, its transmitter sends the image signal (via fiber optic light) to the receiver. The receiver translates it into an image that can be viewed.

This technology has proven very beneficial for most communications. It has profoundly affected military communications on the battlefield. Troops in combat areas are able to communicate over extremely long distances without being detected.

Many tactile missions must be done in darkness to have the winning advantage. Optical surveillance systems and fiber optic transmission technology allow this to happen. The same technology that helps our military protect us is also available to protect our homes as well. Lower cost versions of the same systems are being used by many people to protect and monitor their belongings and loved ones. Businesses depend on these types of business surveillance systems for security in retail stores, industrial manufacturing facilities and many others.


The History of Fiber Optic Technologies

April 11, 2010 Leave a comment

Fiber Optic Technology in The Nineteenth Century

In 1870, John Tyndall, using a jet of water that flowed from one container to another and a beam of light, demonstrated that light used internal reflection to follow a specific path. As water poured out through the spout of the first container, Tyndall directed a beam of sunlight at the path of the water. The light, as seen by the audience, followed a zigzag path inside the curved path of the water. This simple experiment, illustrated in Figure 1, marked the first research into the guided transmission of light.

William Wheeling, in 1880, patented a method of light transfer called “piping light”. Wheeling believed that by using mirrored pipes branching off from a single source of illumination, i.e. a bright electric arc, he could send the light to many different rooms in the same way that water, through plumbing, is carried throughout buildings today. Due to the ineffectiveness of Wheeling’s idea and to the concurrent introduction of Edison’s highly successful incandescent light bulb, the concept of piping light never took off.

That same year, Alexander Graham Bell developed an optical voice transmission system he called the photophone. The photophone used free-space light to carry the human voice 200 meters. Specially placed mirrors reflected sunlight onto a diaphragm attached within the mouthpiece of the photophone. At the other end, mounted within a parabolic reflector, was a light-sensitive selenium resistor. This resistor was connected to a battery that was, in turn, wired to a telephone receiver. As one spoke into the photophone, the illuminated diaphragm vibrated, casting various intensities of light onto the selenium resistor. The changing intensity of light altered the current that passed through the telephone receiver which then converted the light back into speech. Bell believed this invention was superior to the telephone because it did not need wires to connect the transmitter and receiver. Today, free-space optical links find extensive use in metropolitan applications.

Fiber Optic Technology in The Twentieth Century

Fiber optic technology experienced a phenomenal rate of progress in the second half of the twentieth century. Early success came during the 1950’s with the development of the fiberscope. This image-transmitting device, which used the first practical all-glass fiber, was concurrently devised by Brian O’Brien at the American Optical Company and Narinder Kapany (who first coined the term ‘fiber optics’ in 1956) and colleagues at the Imperial College of Science and Technology in London. Early all-glass fibers experienced excessive optical loss, the loss of the light signal as it traveled the fiber, limiting transmission distances.

This motivated scientists to develop glass fibers that included a separate glass coating. The innermost region of the fiber, or core, was used to transmit the light, while the glass coating, or cladding, prevented the light from leaking out of the core by reflecting the light within the boundaries of the core. This concept is explained by Snell’s Law which states that the angle at which light is reflected is dependent on the refractive indices of the two materials ‘ in this case, the core and the cladding. The lower refractive index of the cladding (with respect to the core) causes the light to be angled back into the core as illustrated in

The fiberscope quickly found application inspecting welds inside reactor vessels and combustion chambers of jet aircraft engines as well as in the medical field. Fiberscope technology has evolved over the years to make laparoscopic surgery one of the great medical advances of the twentieth century.

The development of laser technology was the next important step in the establishment of the industry of fiber optics. Only the laser diode (LD) or its lower-power cousin, the light-emitting diode (LED), had the potential to generate large amounts of light in a spot tiny enough to be useful for fiber optics. In 1957, Gordon Gould popularized the idea of using lasers when, as a graduate student at Columbia University, he described the laser as an intense light source. Shortly after, Charles Townes and Arthur Schawlow at Bell Laboratories supported the laser in scientific circles. Lasers went through several generations including the development of the ruby laser and the helium-neon laser in 1960. Semiconductor lasers were first realized in 1962; these lasers are the type most widely used in fiber optics today.

Because of their higher modulation frequency capability, the importance of lasers as a means of carrying information did not go unnoticed by communications engineers. Light has an information-carrying capacity 10,000 times that of the highest radio frequencies being used. However, the laser is unsuited for open-air transmission because it is adversely affected by environmental conditions such as rain, snow, hail, and smog. Faced with the challenge of finding a transmission medium other than air, Charles Kao and Charles Hockham, working at the Standard Telecommunication Laboratory in England in 1966, published a landmark paper proposing that optical fiber might be a suitable transmission medium if its attenuation could be kept under 20 decibels per kilometer (dB/km). At the time of this proposal, optical fibers exhibited losses of 1,000 dB/ km or more. At a loss of only 20 dB/km, 99% of the light would be lost over only 3,300 feet. In other words, only 1/100th of the optical power that was transmitted reached the receiver. Intuitively, researchers postulated that the current, higher optical losses were the result of impurities in the glass and not the glass itself. An optical loss of 20 dB/km was within the capability of the electronics and opto-electronic components of the day.

Intrigued by Kao and Hockham’s proposal, glass researchers began to work on the problem of purifying glass. In 1970, Drs. Robert Maurer, Donald Keck, and Peter Schultz of Corning succeeded in developing a glass fiber that exhibited attenuation at less than 20 dB/km, the threshold for making fiber optics a viable technology. It was the purest glass ever made.

The early work on fiber optic light source and detector was slow and often had to borrow technology developed for other reasons. For example, the first fiber optic light sources were derived from visible indicator LEDs. As demand grew, light sources were developed for fiber optics that offered higher switching speed, more appropriate wavelengths, and higher output power. For more information on light emitters see Laser Diodes and LEDs.

Fiber optics developed over the years in a series of generations that can be closely tied to wavelength. Figure 3 shows three curves. The top, dashed, curve corresponds to early 1980’s fiber, the middle, dotted, curve corresponds to late 1980’s fiber, and the bottom, solid, curve corresponds to modern optical fiber. The earliest fiber optic systems were developed at an operating wavelength of about 850 nm. This wavelength corresponds to the so-called ‘first window’ in a silica-based optical fiber. This window refers to a wavelength region that offers low optical loss. It sits between several large absorption peaks caused primarily by moisture in the fiber and Rayleigh scattering.

The 850 nm region was initially attractive because the technology for light emitters at this wavelength had already been perfected in visible indicator LEDs. Low-cost silicon detectors could also be used at the 850 nm wavelength. As technology progressed, the first window became less attractive because of its relatively high 3 dB/km loss limit.

Most companies jumped to the ‘second window’ at 1310 nm with lower attenuation of about 0.5 dB/km. In late 1977, Nippon Telegraph and Telephone (NTT) developed the ‘third window’ at 1550 nm. It offered the theoretical minimum optical loss for silica-based fibers, about 0.2 dB/km.

Today, 850 nm, 1310 nm, and 1550 nm systems are all manufactured and deployed along with very low-end, short distance, systems using visible wavelengths near 660 nm. Each wavelength has its advantage. Longer wavelengths offer higher performance, but always come with higher cost. The shortest link lengths can be handled with wavelengths of 660 nm or 850 nm. The longest link lengths require 1550 nm wavelength systems. A ‘fourth window,’ near 1625 nm, is being developed. While it is not lower loss than the 1550 nm window, the loss is comparable, and it might simplify some of the complexities of long-length, multiple-wavelength communications systems.

Fiber Optic Applications in the Real World

The U.S. military moved quickly to use fiber optics for improved communications and tactical systems. In the early 1970’s, the U.S. Navy installed a fiber optic telephone link aboard the U.S.S. Little Rock. The Air Force followed suit by developing its Airborne Light Optical Fiber Technology (ALOFT) program in 1976. Encouraged by the success of these applications, military R&D programs were funded to develop stronger fibers, tactical cables, ruggedized, high-performance components, and numerous demonstration systems ranging from aircraft to undersea applications.

Commercial applications followed soon after. In 1977, both AT&T and GTE installed fiber optic telephone systems in Chicago and Boston respectively. These successful applications led to the increase of fiber optic telephone networks. By the early 1980’s, single-mode fiber operating in the 1310 nm and later the 1550 nm wavelength windows became the standard fiber installed for these networks. Initially, computers, information networks, and data communications were slower to embrace fiber, but today they too find use for a transmission system that has lighter weight cable, resists lightning strikes, and carries more information faster and over longer distances.

The broadcast industry also embraced fiber optic transmission. In 1980, broadcasters of the Winter Olympics, in Lake Placid, New York, requested a fiber optic video transmission system for backup video feeds. The fiber optic feed, because of its quality and reliability, soon became the primary video feed, making the 1980 Winter Olympics the first fiber optic television transmission. Later, at the 1994 Winter Olympics in Lillehammer, Norway, fiber optics transmitted the first ever digital video signal, an application that continues to evolve today.

In the mid-1980’s the United States government deregulated telephone service, allowing small telephone companies to compete with the giant, AT&T. Companies like MCI and Sprint quickly went to work installing regional fiber optic telecommunications networks and fiber optic transmission systems throughout the world. Taking advantage of railroad lines, gas pipes, and other natural rights of way, these companies laid miles fiber optic cable, allowing the deployment of these networks to continue throughout the 1980’s. However, this created the need to expand fiber’s transmission capabilities.

In 1990, Bell Labs transmitted a 2.5 Gb/s signal over 7,500 km without regeneration. The system used a soliton laser and an erbium-doped fiber amplifier (EDFA) that allowed the light wave to maintain its shape and density. In 1998, they went one better as researchers transmitted 100 simultaneous optical signals, each at a data rate of 10 gigabits (giga means billion) per second for a distance of nearly 250 miles (400 km). In this experiment, dense wavelength-division multiplexing (DWDM technology, which allows multiple wavelengths to be combined into one optical signal, increased the total data rate on one fiber to one terabit per second (1012 bits per second).

Fiber Optic Technology in The Twenty-First Century and Beyond

Today, DWDM technology continues to develop. As the demand for data bandwidth increases, driven by the phenomenal growth of the Internet, the move to optical networking is the focus of new technologies. At this writing, nearly half a billion people have Internet access and use it regularly. Some 40 million or more households are ‘wired.’ The world wide web already hosts over 2 billion web pages, and according to estimates people upload more than 3.5 million new web pages everyday.

The important factor in these developments is the increase in fiber transmission capacity, which has grown by a factor of 200 in the last decade. Figure 5 illustrates this trend.
Because of fiber optic technology’s immense potential bandwidth, 50 THz or greater, there are extraordinary possibilities for future fiber optic applications. Already, the push to bring broadband services, including data, audio, and especially video, into the home is well underway.

Broadband service available to a mass market opens up a wide variety of interactive communications for both consumers and businesses, bringing to reality interactive video networks, interactive banking and shopping from the home, and interactive distance learning. The ‘last mile’ for optical fiber goes from the curb to the television set top, known as fiber-to-the-home (FTTH) and fiber-to-the-curb (FTTC), allowing video on demand to become a reality.